3Pole 20Amp Waterproof Isolator Switch IP66 Outdoor AS Standard

UKF isolator is rigidly built to withstand more than just the vagaries of the weather,it is designed also for frequent switching even on severe load such as switching of motor loads or other highly inductive load. Suitable to be mounted in outdoor and indoor for diverse environment.

Product Feature

1.The mounting mechanism of the switch base terminal box provides a larger and simpler wiring position.

2.The grounding and neutral connection rods are installed with double tightening screws, which can effectively fix all cables to the terminal box and clamp reliably to prevent liquid leakage

3.Safety is higher, the switch is installed on the metal structure with an insulating cap, the insulating cap covers the base mounting screw, to prevent contact with the live cable insulation cover can be reliably installed on the metal structure switch,WHD panel cover and the base of the combination of two plastic screws, can fully avoid leakage.

4. Each device is provided with a threaded conduit joint and threaded reducing pipe for connection to a 25mm or 20mm conduit and nut; Nuts must be installed to ensure IP ratings.

5. Impact resistant base and cover in almost all installation conditions can withstand violent impact between the base and cover is divided by a weather-resistant waterproof sealing ring.

6. For safety, a hole with a diameter of 7mm in the OFF position is used in a heavily machined cast baffle to padlock the control lever during maintenance or overhaul. The deep-mounted baffle is secured to prevent accidental switch operation of the joysticks.

7. All products comply with IEC60947-3 standard and provide safe and reliable control of power supply in any harsh working environment.

8. Appearance color: the standard color of the switch is gray and white.

Product Applications

Our products are widely used in metallurgical, chemical, power electronics, airports, railways, construction sites, mines, quarries, drainage treatment plants, automobile manufacturing, ports, terminals, shopping malls, hotels and other places. When servicing switches and safety switches, clearly mark the "on" and "off" positions, and set a padlock hole. The padlock can be installed in the "closed" part; if you want to lock it in the "open" position, you only need to lock one hole; To ensure the safety of users.