Home ProductsThermal Overload Relay

GTH-220 Three phase Electronic Overload Relays for Motor Contactor

GTH-220 Three phase Electronic Overload Relays for Motor Contactor

  • GTH-220 Three phase Electronic Overload Relays for Motor Contactor
GTH-220 Three phase Electronic Overload Relays for Motor Contactor
Product Details:
Place of Origin: China
Brand Name: KRIPAL
Certification: CE
Model Number: UKH-220
Payment & Shipping Terms:
Minimum Order Quantity: 500 pcs
Price: negotiable
Packaging Details: Each unit packed in a individual box
Delivery Time: 20 days and depends on ordering quantity
Payment Terms: T/T, L/C
Supply Ability: 30000 pcs per month
Contact Now
Detailed Product Description
Color: Blue/orange Pins: 3
Type: Thermal Protection: Overload
Usage: Usually With Ac Contactor Reset: Manual / Automatic
High Light:

overload protection relay

,

overcurrent relays

 

GTH-220 Three phase Electronic Overload Relays for Motor Contactor

 

 

UKH series thermal overload relays apply to circuit of AC 50Hz or  60Hz, rated voltage to below 660V and rated current . 1A-800A for AC motor overload and open-phase protection during long time or intermittent long time service, which can also protect 3-phase serious imbalance and long starting time of motor or long timer operation, can also be used for corresponding AC contactor for electromagnetic starter.

 

 

Applications:

 

Thermal overload relays are designed to prevent damage or destruction of electrical machinery by reacting to increases in current induced temperatures. Should the temperature rise above the rating of the relay, it will activate and disconnect the primary supply and prevent equipment damage. This deactivation is achieved via either a mechanical or electrical interlock between the relay and the main power supply. The temperature sensitive component of a thermal overload relay may be a simple bi-metal strip or a more sophisticated electronic sensor or probe.

 

 

Motion Characteristic:

 

Three phase Balance Motion Time

No

Times of the setting current

Motion time

Start condition

Ambient temperature

1

1.05

>2h

Cold state

20±5oC

2

1.2

<2h

Heat state(Following the No.1 test)

3

1.5

<4min

4

7.2

10A

2s< Tp≤10s

≤63A

Cold state

10

4s< Tp≤10s

>63A


Phase-losing Motion Characteristic

No

Times of the setting current

Motion time

Start condition

Ambient temperature

Any two phases

Another phase

1

1.0

0.9

>2h

Cold state

20±5oC

2

1.15

0

<2h

Heat state(Following the No.1 test)

 

 

Construction of Thermal Relay:

 

The construction of thermal relay is quite simple. As shown in the figure above the bimetallic strip has two metals – metal A and metal B. Metal A has lower coefficient of expansion and metal – B has higher coefficient of expansion. One heating coil is would on the bimetallic strip. When over current flows through the heating coil, it heats up the bimetallic strip.

 

Due to the heat generated by the coil, both of the metals are expanded. But expansion of metal B is more than expansion of metal A. Due to this dissimilar expansion the bimetallic strip will bend towards metal A as shown in the figure below.

 

 

Main benefits:

 

1.  Reliable protection for motors

2.  Easy to create starters

3.  Optimized match to UKC1 series contactors

4.  Single mounting kits and wire reset for remote control available for specific applications.

 

 

Working conditions:

 

1. The installation altitude less than 2000m

2. The surrounding temperature range: from -5°C ~ +40°C

3. In the non-explosive condition. or without adequate erosion and destruction of gas and

   dust conductive area .

4. Without  rain and snow invade 

5. Pollution level 2

 

 

 

 

GTH-220 Three phase Electronic Overload Relays for Motor Contactor 0

Contact Details
Zhejiang KRIPAL Electric Co., Ltd.

Contact Person: Allen

Send your inquiry directly to us
Best Products
Other Products